Three years after its commencement, Construction Contracts Act, 2013 continues to provide a pathway to cash flow in the construction sector. By Pat Breen TD This innovative and important legislation for the construction sector, which was commenced in 2016, regulates payments and particularly the timing of payments under construction contracts. While many businesses in the construction sector are aware of this legislation, some businesses may not be fully aware of the detailed statutory protections and obligations set out in the Construction Contracts Act, 2013. One of the key objectives of the legislation is to provide payment certainty for subcontractors, who were considered vulnerable in the payment cycle in the construction sector. As the construction sector continues to expand, cash flow is critical and it is cash flow that is at the core of the Construction Contracts Act, 2013. Therefore, construction businesses should ensure that their payment practices comply with the terms of this legislation. I consider that members of the accountancy profession are uniquely placed to encourage construction businesses across the country to review their payment practices to ensure that they comply with this legislation. I welcome the opportunity provided by Accountancy Ireland to highlight this legislation, and a brief summary of the main provisions of the Act is set out below. Further information on the Act is available on the website of my Department at www.dbei.gov.ie. Applicability of the Construction Contracts Act, 2013 to construction contracts The Construction Contracts Act, 2013 applies to certain construction contracts entered into after 25 July 2016, but not to all such contracts. For example, it excludes: Contracts of a value of not more than €10,000; or Contracts that relate only to a dwelling of not greater than 200 square metres where a party to such a contract occupies, or intends to occupy, the dwelling as his/her residence; or Contracts between a State authority and its partner in a public private partnership arrangement. All other construction contracts must comply with the provisions of the Act and the parties may not seek to exclude a contract from the legislation under any circumstances, whether the contract is an oral contract or a written contract. Construction contracts to which the Act applies must provide for the following contractual terms: The amount of each interim and final payment, or an adequate mechanism for determining those amounts; The payment claim date for each amount due, or an adequate mechanism for determining it; and The period between the payment claim date and the date on which the amount is due. Main contracts and subcontracts Main contractors are at liberty to agree their contractual terms with their clients, subject to adhering to the mandatory provisions required by the Act as outlined above. However, if a main contract fails to fully incorporate the mandatory provisions, then the Act imposes the applicable contractual term or terms set out in the Schedule to the Act, terms which are also applicable to subcontracts. The Act stipulates that all subcontracts must at least provide the following payment claim dates: 30 days after the commencement date of the construction contract; 30 days after the payment claim date referred to above and every 30 days thereafter up to the date of substantial completion; and 30 days after the date of final completion. The date on which payment is due in relation to an amount claimed under a subcontract shall be no later than 30 days after the payment claim date. The Act permits the parties to a subcontract to make more favourable provision for a subcontractor than the above contractual terms. Payment claims An executing party – the party which carries out the work under a construction contract – is required to submit a payment claim notice to the other party no later than five days after the relevant payment claim date. If the other party disputes the amount claimed by the executing party, that party is required to respond to the executing party in writing no later than 21 days after the payment claim date setting out the reason(s) why the amount claimed is disputed and the amount, if any, that it proposes to pay to the executing party. It may be possible for the parties to reach an agreement on the amount to be paid to the executing party. However, if no such agreement is reached by the payment due date, the other party is legally required to pay the executing party the amount, if any, which the other party proposed to pay in its response to the contested payment claim notice from the executing party. This payment shall be made no later than the payment due date in accordance with Section 4(3)(b) of the Construction Contracts Act, 2013. Statutory adjudication of payment disputes The Construction Contracts Act, 2013 also introduced, for the first time in Ireland, a statutory right to refer a payment dispute for adjudication. A ‘notice of intention’ to refer a payment dispute for adjudication must be served by one of the parties to the payment dispute. The parties may then jointly agree to appoint an adjudicator of their own choice, within a five-day period. However, if the parties cannot reach agreement on who to appoint, an application may be made after the five-day period to the Chair of the Construction Contracts Adjudication Panel, Dr Nael Bunni, to request the appointment of an adjudicator to the dispute. The appointed adjudicator, whether appointed by agreement of the parties or by the Chair, is required to reach a decision on the dispute within 28 days. This period may be extended in certain circumstances.   Pat Breen TD is Minister of State at the Department of Business, Enterprise and Innovation.

Large customers are good for business, but can stretch your cash flow.  By Peter Brady Have you recently received a ‘polite letter’ from your US multinational corporation (MNC) customer advising of a stretch in your credit terms from 30 days to 90 plus? Or, indeed, from any of your MNC customers? In recent years, the extension of MNC credit terms has become business as usual across the globe but for SMEs, it is anything but business as usual. Think about it. How would an extension of credit terms impact on your cash flow and projections this year? And what are the implications for your growth strategy in 2020 and beyond? Winning a contract with a large MNC is a measure of success for established SMEs. However, an extension of credit terms can feel like a double-edged sword as it puts excessive strain on cash flow. Why does it matter? A strain on your cash flow can have many implications, all of them negative. The first impact is on your suppliers – they expect payment in 30 days. There is an immediate gap in cash flow and you are unlikely to have sufficient sway with your suppliers to realign. This could mean: You are not in a position to fund the initial costs of fulfilling contracts; Pressure is placed on your existing supplier relationships in the form of increased risk around quality, timely delivery and higher prices; Capacity to deliver on-time to customers is affected; and Ability to grow the business at pace is limited. The lost opportunity  It may seem obvious, but having cash tied up in debtors with long credit terms is a fundamental challenge for most SMEs. If SMEs could access this cash early, it would give a distinct competitive advantage when negotiating terms with key suppliers. Think of what you could do if your invoices were paid on day one, not day 90. First, you could pay your suppliers early, enhance the relationship and ultimately secure better terms. Second, you could deploy funds into driving new customer acquisition and fund new business tenders with the comfort of cash flow certainty. So what do you do? You have two options: 1. You could try to negotiate: know where you stand in your customer’s eyes. Do your products or services play an important role in their success? Is your product or service critical to their delivery? Even so, unless you are the sole producer of a key strategic element, there’s another company out there to potentially replace you. Alternatively, your customer might offer softer credit terms in exchange for a pricing discount – but cutting margins is an extremely expensive source of finance and unlikely to be recovered. This course of action doesn’t make good business sense, as it is a race to the bottom. 2. Look at funding options to bridge the gap: the financial market is developing all the time to reflect the needs of business. For decades, when Ireland’s SMEs needed to fill the cash flow gap left by extended credit terms, they had limited choices – commercial overdrafts, short-term lending or an invoice discounting facility. That may have been adequate in the past but such is the success, ambition and global reach of Irish SMEs across all sectors today, this range of funding options falls short of their requirements. Commercial overdrafts are harder to secure and are generally seen as an unreliable method of funding, not directly aligned to the changing requirements of a business. Similarly, short-term lending is onerous to put in place and comes with significant levels of conditionality. An invoice discounting facility continues to plug the cash flow gap for many SMEs in Ireland. However, invoice discounting facilities are operationally clunky and carry significant fixed and hidden costs and limitations. They are therefore not really fit for purpose for today’s SMEs. Many SMEs often have a small number of key strategic customers in their sales mix. Supported by government bodies such as Enterprise Ireland, Ireland’s SMEs have a global footprint. Exporting is crucial to scalable business success, and not just to Western Europe. SMEs are securing contracts across the globe – US, Canada, EMEA and Asia. Invoice discounting facility For years, the invoice discounting facility has serviced working capital funding requirements. However, the facility comes with three major limitations: The facility limit; Geographical restrictions; and Debtor concentration risk limits. The facility limit At the outset, SMEs are subjected to a long and onerous process to get approval for the invoice discounting facility. Fair enough, you may say, as this is effectively a loan and it follows that the bank providing it decides how much the facility is for. SMEs must enter into a long-term commitment, often saddled with non-usage charges or exit fees. SMEs must also pay credit insurance and sign a personal guarantee – something entrepreneurs have grown to fear. Geographical restrictions Exporting to the UK? Great. Exporting to United States (US)? Not so great. Country risk and the law of the land plays a major role in how traditional lenders assess the risk and granting of facility limits. If the country in which your customer is located is outside of what is considered in banking terms to be palatable, funding limits and exclusions will apply. Debtor concentration risk limits The most common reason for restricting funding under an invoice discounting facility remains customer or debtor concentration. It applies when an SME becomes over-exposed to a single debtor. The debtor could be a large household brand name, but traditional lenders must impose facility limit restrictions. For SMEs, it is somewhat ironic that the more business you do with a key customer, the more your funding is limited. So, back to your US multinational extending its credit terms. You’ve worked tirelessly to win this business, but you can’t sustain 90 days’ credit and this customer accounts for over 60% of your debtor book. Your business needs: Consistent certainty of funding, without any limit relating to geography or debtors; Funders who recognise the strength of your business model and the substance of the underlying transactions; and Access to working capital to scale your business globally. Market and product innovation Invoice, purchase order and recurring revenue trading are collectively known as “receivables trading”. Receivables trading ticks all the boxes. It enables SMEs to leverage their customer relationships. By selling invoices and future invoices (purchase orders) to a pool of capital market funders, SMEs can access finance when they need it. What difference do capital market funders make? The funders are capital market institutional funders, pension funds, corporates and sophisticated investors – and there is a large pool of these funders. The fact that there is not just one entity, but a pool of funders purchasing the receivables (invoices or purchase orders) eliminates the requirement for imposing concentration or geographic limits on the SME. It extinguishes the need for any commitment, lock-ins or fixed costs. At no stage is there an ask for a personal guarantee. This funding solution puts control back into the hands of SMEs and allows them to decide when they need to access funding on their terms – a liberating benefit. How does it work? Receivables trading is available via an online platform. A pool of institutional funders (the buyers) are members of the platform. SMEs (the seller) uploads their invoice or purchase order and the buyers purchase them. The model is ideally suited to established SMEs with MNC or sovereign debtors. The SME can use the online platform in conjunction with their existing facility by carving out specific debtors from the invoice discounting facility. In conclusion Business is constantly changing and working capital funding has caught up. Alternative funding where sellers and buyers connect directly via an online platform is fast becoming the norm. With this funding solution, SMEs can tender for business of any scale globally – confident that they can fund the upfront costs. It’s a gamechanger for most. According to the Central Bank Survey of SMEs, which was published in January 2019, the top two reasons for credit applications were working capital, and growth and development. ISME’s quarterly business survey reveals that 70% of Ireland’s SMEs still rely solely on traditional bank funding. In Europe, it’s only 30%. Alternative funding is the future of funding. Peter Brady FCA is Co-Founder and CFO at InvoiceFair.

When it comes to finance process outsourcing, how do we keep up with industry trends? By Sinead Donovan Whether an organisation uses an in-house shared services centre (SSC) or external service provider, outsourcing has become a familiar concept to many of us in industry and professional services settings. It is no longer a new idea when it comes to finance and non-core process solutions. Long gone are the days when terms such as SSC and business process outsourcing (BPO) were treated as an innovation. Rather, it has become a finance strategy staple for most mature and growing multinationals. The first outsourced centre in Ireland opened its doors in 1995 – an SSC of a large US multinational. Others quickly followed suit and there was an explosion of SSCs across Ireland supporting multinational organisations globally. Many have since moved away from the Irish market, or made a complete turnaround by transforming their services in the last number of years. This is a natural progression in the lifecycle of outsourcing and service transformation. Coinciding with this evolution, a new era of outsourcing has emerged which is a very interesting and indicative trend. Traditionally outsourced services concentrated on high volume and low complexity, non-value-add processing tasks – be that booking of accounts payable invoices or entering pre-approved journal vouchers. A typical offering comprised of three main functions: accounts payable (AP), accounts receivable (AR) and general ledger (GL). While you may have occasionally found other support functions (think of master data management), this was not standard practice in the early days. Business partner Some 20 years on, the situation is rapidly changing. SSCs and BPOs are now expected to remain relevant while delivering valuable services to the parent company or clients they serve. With the increase of automation and technology, there is decreased need for support of high volume, low complexity tasks. Instead, there is an increased requirement for higher value-add analytical services. System transitions and implementations, process improvement and historical issue resolution are among the services now provided by BPO teams across professional services and SSCs alike. Additional value-add supports sought by the parent company or client now include financial planning and analysis, advice on enterprise resource planning (ERP) and business combinations. If we were to sum up this trend in one sentence, ‘a move from processor to business partner’ seems the most fitting. From a business perspective, what do companies look for when transforming their finance function? It seems that demands placed on service providers have evolved from what they would have been some 20 years ago, when the main consideration was which finance process could be outsourced using a straightforward ‘lift and shift’ model. Today, this approach has changed. Many businesses are undergoing systems and process transformation. Thus, shared services providers need to take that into account and adjust their solutions to add real value and innovation. This is often done by utilising technology, robotic process automation (RPA) or artificial intelligence (AI) to tackle all the repetitive and high volume tasks while allowing employees to concentrate on process improvement, in-depth analysis of big data, and key risk areas instead. Looking to the future With this trend, it is easy to see that the key to success for any SSC or BPO service provider – especially those in a professional services environment – is to remain relevant and to continue looking for new ways to improve efficiency, add value and innovate. Exactly how to stay relevant is, of course, a bigger question. It can be easy to get lost in multitudes of considerations, trying to keep up with changing attitudes and demands. While there is no doubt that continuous improvement and development is important to successful client-provider relationships, there is another more subtle – but equally important – aspect that should be given just as much attention. Indeed, it is especially relevant in the professional services setting. Mutual trust in the relationship between provider and client can be the deciding factor in the success or failure of a project. Both parties should be committed to the mutually beneficial collaboration that allows BPO providers to continue adding value and evolving to support clients or parent companies – all with a view to remaining relevant in this dynamic market. Sinead Donovan FCA is a Partner in Financial Accounting and Advisory Services at Grant Thornton.

Work-life balance can have enormous value in any organisation,  but meeting the needs of a broad spectrum of employees is more art than science. By Ed Heffernan For well over a decade now, work-life balance has been part of the conversation. The 2019 Leinster Society Salary Survey cited, perhaps unsurprisingly, that 86% of respondents said it was a key factor when considering an external move. Surprisingly, however, some 52% of respondents cited they would sacrifice up to 10% of their financial reward for better work-life balance. What is this mysterious, evasive thing that the majority of accountants would take a pay cut for? How is work-life balance defined? Sometimes things are more easily defined by what they are not, rather than what they are. Here’s an example: Work-life balance does not mean equality between work hours and non-work hours; Work-life balance does not necessarily mean working fewer hours than you are working now; Work-life balance is not a one-size-fits-all matter; it means different things to different people and will have a varied meaning over time for each individual; and Work-life balance means different things to different generations; for some, it’s a nice-to-have while for others, it’s an expectation. More often than not, work-life balance comes down to three things – flexibility, achievement and enjoyment. Flexibility is doing your job at the times that work for you. We all have different commutes and different responsibilities outside of work; the employers that recognise this as a fact of life are the ones who retain their people for longer and get more return for their people’s time. For example, some employers will: Allow some degree of flexibility on start and finish times to allow for commutes, family responsibilities, sports commitments or even to make sure that when someone needs to finish a little early, they feel that they can; Allow people to work from “not the office” and trust that they will. Numerous studies suggest that the worst possible place for employee productivity is the workplace – there are just too many distractions. Enabling certain types of work, especially the type of work that requires uninterrupted focused activity, to be conducted outside of the office can lead to substantial  increases in productivity; and Giving a little can mean gaining a lot. If one of your team has a medical appointment or another one-off event, allowing them the freedom to be away from the desk without deducting the time from their holidays, or stating that they have to make the time up, can have enormous reciprocal effects in the future. Small, random acts of kindness are more powerful than any policy. There is a catch, though. Even if a company does manage to create a flexible working environment, it is still not going to please all of the people all of the time. When it comes to flexibility, some people at certain stages in their life will need a little more; others a little less. Implicit to the flexibility component of work-life balance is that it means different things to different people at different stages. Companies that create a culture of flexibility as opposed to enforcement often get the best results. Achievement is the cornerstone of human ambition. Everyone needs to have a clear understanding of what they need to achieve in their role and to be recognised when this achievement occurs. This can be weekly, monthly or even annually. It must be measurable in some way and it must be recognised, either intrinsically (for example, a simple ‘thank you’ for a job well done) or extrinsically (for example, some type of financial reward – a token, an unexpected gesture, a bonus, or even a salary increase). Everyone needs to feel that they are achieving something in their role and it is ultimately up to their direct manager to ensure that achievements are recognised. Those who feel they are achieving something tend to feel like they have work-life balance and in many cases, they feel this way regardless of the hours they work. Enjoyment is a less tangible, but equally important, part of work-life balance. Enjoyment does not just mean having fun – that’s only part of it. Enjoyment has a much wider definition when it comes to work-life balance. It’s how you feel about what you do; it’s how it feels to work in your team; it’s feeling that you are working towards a shared goal; it’s respecting and learning from the people you work with; it’s celebrating success and learning from failure with your colleagues; it’s the opportunity to help others learn; it’s the opportunity to work in a business that you believe in for a cause you admire; and it’s a whole lot more. Flexibility and achievement are the easy ones to define and create a policy for – enjoyment is the piece that is really personal, and the piece that many managers often get wrong. Work-life balance can have enormous value in any organisation. Get the mix of flexibility, achievement and enjoyment right, and your people will work harder, be happier, be more productive and will stay longer. Get it wrong these days, and you will end up with the opposite. It’s that easy. Why authentic leaders listen For some people, it isn’t the work component that creates the imbalance; it’s the life component. At certain times, we all come under stresses that have nothing to do with work. Some people make work the escape from these stresses; other people bring these life stresses into the workplace with sometimes devastating consequences. People don’t change without reason. If someone on your team begins to submit work that isn’t up to their usual standard, uncharacteristically misses multiple deadlines or just seems ‘off form’ in the office, don’t get annoyed – get curious. Sometimes it might just be listening; sometimes it might be arranging some extra flexibility or a reduced workload on a temporary basis. Regardless of the situation, every time you engage and, where you can, offer to take action, you will not only make a difference for that person, but you will create longer lasting, deeper bonds between yourself and your team. You can create the space your people need when life causes an imbalance. And from experience, that’s where the real magic happens. It’s easy to ignore the problem, but it takes bravery to ask the question. Which type of leader are you?   Ed Heffernan is Managing Partner at Barden Accounting and Tax.

With Budget 2020 fast approaching, what – if anything – could be on the table from a tax perspective? By Peter Vale & Oliver O'Connor At the time of writing, the Minister for Finance and Public Expenditure & Reform, Paschal Donohoe TD, had already flagged that we can expect little by way of tax cuts in the upcoming Budget. So, from a tax perspective, are we looking at a damp squib or could there be a mix of tax cuts and increases that net to zero? And if so, who are the winners and losers likely to be? Income tax In the authors’ view, we will see some modest tax cuts next month benefiting primarily lower and middle income earners, with higher earners likely to see some of this cut back – perhaps via a restriction in tax credits. Depending on the scale of the adjustment for higher earners, this could mean they see a net decrease in take-home pay with all other taxpayers seeing a modest increase. So, in summary, we don’t expect to see much either way in terms of income tax adjustments, with lower and middle income earners likely to be the main beneficiaries of any cuts. We also don’t expect to see any longer term statement committing to a reduction in our high marginal tax rates of 52% and 55% for employees and self-employed respectively. Nor should we expect to see a broadening of the tax base; indeed, successive budgets have taken more and more people out of the tax net. The concept of broadening the tax base was a recommendation of the Commission on Taxation report almost 10 years ago, but it has not been embraced by governments since. While the idea of more people paying a little has merits, it is unlikely to be a vote winner. Pensions and investments On the investment side, we are all aware that deposit rates are derisory at present and unlikely to increase any time soon. We are also very keenly aware (as is the Government) that there is a potential pensions time-bomb in the coming decades. The auto-enrolment regime, planned for the early 2020s, is a step towards ensuring that people are more sufficiently funded from a pension perspective and thus, not as dependant on State support in their later years. To this end, it is crucial that the current pension rules are not adjusted (downwards) but rather, that all are maintained at a minimum. A possible concession, which would be of long-term benefit to all, would be to increase the net relevant earnings from the current €115,000 to even €125,000. Entrepreneurs Entrepreneurs would ideally like to be given an increase in the Entrepreneur Relief from €1,000,000 to a more substantial figure. As importantly, they would like to know that there is a roadmap over the coming three to five years to bring this relief more in line with our near neighbours, which is 10 times greater than our current level. We pride ourselves in being the best small country in which to do business, enabling this crucial economic grouping to thrive and create yet more economic prosperity for the country as a whole. Corporate tax We know for certain that new transfer pricing legislation will be introduced in October. The new provisions will implement 2017 OECD guidelines into Irish law and also make certain other changes. While the nature of the other changes is still uncertain, it is very likely that transfer pricing will be extended to non-trading transactions, in particular where tax is being avoided. Certain grandfathering provisions for arrangements in place in 2010 will be removed while it is also possible that transfer pricing will be extended in some form to SMEs. Ireland is also obliged under EU law to bring in anti-hybrid legislation on 1 January 2020, which broadly prevents deductions for payments that are not taxed elsewhere. A further change required under EU law is to restrict tax relief for interest to 30% of a company’s EBITA. At the time of writing, it is still unclear whether this legislation will be in place at 1 January 2020. It should be noted that there will be a de minimis limit (expected to be roughly €3 million), group provisions and certain other carve-outs from the scope of the new legislation. Other changes We don’t expect to see significant changes in the VAT space. There isn’t the fiscal space to provide a VAT reduction to a specific sector (similar to the lower rate previously provided to the hospitality sector), while our headline rate is already relatively high and hence not likely to be used as a revenue-raising measure. It would be positive to see some targeted tax reliefs introduced in the Budget, despite the negative press that some of these reliefs have received in the past. However, sensible tailored reliefs have a role. Improvements to some of the existing reliefs should also be considered. Overall, it is possible that this Budget will be seen as a damp squib. But the devil will be in the detail and there is an opportunity to make changes that will bolster key sectors of our economy. Peter Vale FCA is Tax Partner at Grant Thornton. Oliver O’Connor FCA is Partner, Private Client and Wealth Management at Grant Thornton.

Paul Duffy, Ding’s new Head of Finance, discusses his move from practice to industry and life in an entrepreneur-led environment. What enticed you to move from practice to industry? I spent 10 years at PwC. I worked in the audit practice in Dublin for five years, specialising in the technology and telecommunications industries. I then spent the next five years working in the deals practice in Boston, advising private equity and corporate clients on their M&A deal execution. Although I thoroughly enjoyed my time there, I felt a move to a new industry would provide a fresh challenge. I’ve always wanted to work for an entrepreneur-led company in the technology sector and, preferably, one going through a period of accelerated growth. Ding seemed like a good fit all round. What does your new role at Ding entail?  As head of finance, my role covers a wide remit. My colleagues in finance are much more than retrospective number-counters at Ding. The team is central to how Ding functions. It is a complicated machine, due in no small part to the number of jurisdictions in which it operates. I also oversee the financial operations function, which comprises a team of 15 employees in Dublin, London, Barcelona, Paris, New Jersey, Florida, Dubai and Dhaka. Our financial operations team acts as a business partner to our business development team, so the tasks can vary from on-boarding and negotiating with new mobile operators to implementing new systems to support business growth. What do you find most challenging about your role? It is probably the demands that come with having such an international business. Ding operates in more than 140 countries and works across multiple time zones, in over 100 currencies, and across a myriad of complex regulatory environments. This brings its challenges. It’s been an adjustment just getting used to the various time zones and holiday schedules alone. We sell operator airtime so we hold stock for over 500 operators around the world, which the finance team manages. To facilitate this, we buy and sell in multiple currencies every day, and we need to forecast demand to determine stock levels.  Describe your typical day. Given the international nature of our business and the demands that brings, no two work days are the same. I try to start off the day with a quick gym session, then to the office. I tend to catch up with our CFO mid-morning to discuss the status of ongoing finance projects and the latest business performance. Each day, I try to speak with our various teams around the world so I have to work within the time zones. Before lunch, I usually have a video call with Dubai to chat through any issues or ongoing projects. In Ding, we try to promote collaboration across different business functions. I’m a believer in doing things face-to-face where possible and we have an in-house barista and coffee bar, so it’s a nice place for regular meetings with colleagues. In the afternoon, I could be working through the key commercial terms of a new customer agreement with legal, or meeting with business development to discuss things like banking and tax requirements for a new region. In the evening, I usually log on to answer emails from our US team, who are often on the road meeting potential new customers. What traits do you value most in your colleagues? Intellectual curiosity, which isn’t always encouraged as people come up through the ranks in finance. In today’s business world, speed and efficiency are often a key focus but possessing an intellectual curiosity encourages critical thinking and ultimately yields better results for the business. Flexibility is another trait that I value. In a fast-paced environment such as Ding, deadlines and targets change frequently and having the ability to be flexible and agile is important. It makes for a better team player, and a better partner for customers. What is your best piece of business advice? Build a meaningful network.